Walther Creed & PPX Mechanical Recoil Reduction System by DPM

Walther Creed & PPX Mechanical Recoil Reduction System by DPM

Walther Q4 4” Barrel Polymer & Steel Frame ( TAC / M2 ,OR ) Mechanical Recoil Reduction System Captured Version by DPM

Walther Q4 4” Barrel Polymer & Steel Frame ( TAC / M2 ,OR ) Mechanical Recoil Reduction System Captured Version by DPM

Walther Q5 Match M1/M2 and PDP 5″ Mechanical Recoil Reduction System by DPM

*Available for U.S. customers only

New Intelligent Technology-18 Adjustable user settings.

The DPM Mechanical Recoil Reduction System is a direct replacement for the stock recoil rod and does not change the configuration of the pistol. As always, DPM products are designed and developed with user’s safety as a priority. Exceptional manufacturing and engineering using high-end materials.

Compatible for Walther PDP 5″ just add to the comments “For PDP 5” as it requires an additional spacer for the spring house.

$134.00
Availability: In stock
SKU
1000177
Reward PointsEarn 100 points for writing a review for this product

DPM Mechanical for Walther Q5 Match M1/M2 and PDP 5″ Recoil Reduction System by FAB-Defense - DPM Systems Technologies LTD

This DPM System works with 6 different buffer recoil springs which each one offers different spring force (forces are listed at the end of the description).

The System includes 3 external springs, 6 buffer recoil springs and 1 safety pin.

The longer spring (more coils) is stronger and has a heavier pound rating than the shorter spring.

Forces:

Soft 0.7mm

Short = 8.0 kg/ 17 lbs

Medium = 9 kg/ 20 lbs

Long = 10 kg/ 22 lbs

Hard 0.8mm

Short = 9.0 kg/ 20 lbs

Medium = 10.5 kg/ 23 lbs

Long = 11.5 kg/ 26 lbs

Suggestion: For low power (very soft ammunition) its not essential to use any of the Buffer Springs.     

In that case the System in full open position offers 7 kgs/ 15 lbs total force.

 

Feel free to try any possible combination of the external and buffer springs to fine tune the pistol function depending the power of the ammunition is used and according to your personal standards.

Overall Advantages

  • Faster follow up shots
  • Improved firing speed
  • Slide and Frame Protection
  • Elimination of jams
  • Significant recoil reduction
  • Better double-tap concentration
  • Better control and greater accuracy

Recoil System Forces

Total Force
Spring 1
Spring 2
11.8Kg / 26 lbs Short: 3.750kg / 8.26 lbs Long: 4,100kg / 9.0 lbs

Lifetime Warranty for unlimited usage rounds.

DISCLAIMER: This product is not manufactured, authorized, endorsed,or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

No Related Posts

Write Your Own Review
You're reviewing:Walther Q5 Match M1/M2 and PDP 5″ Mechanical Recoil Reduction System by DPM
Your Rating