AIMPOINT MICRO T-1

AIMPOINT MICRO T-1

Aimpoint 3X-C Conjunction With All Aimpoint Sights

Aimpoint 3X-C Conjunction With All Aimpoint Sights

3X Mag Aimpoint High Quality Magnifying Module With Spacer & Twist Mount

The Aimpoint® 3XMag magnifying module is specially designed for compatibility with Aimpoint sights and for maximum flexibility and better performance in the field.
$839.95
Availability: Out of stock
SKU
3XMAG
Reward PointsEarn 100 points for writing a review for this product

aimpoint cover photo

Aimpoint 3X Mag

Overview:

The Aimpoint® 3XMag magnifying module is specially designed for compatibility with Aimpoint sights and for maximum flexibility and better performance in the field.
The Aimpoint® 3XMag magnifying module is a high-quality optic that can be used with any Aimpoint sight for extended range target identification and engagement. This high-quality accessory gives the shooter the best of both worlds: rapid CQB aiming with an Aimpoint sight, and long-range target acquisition in combination with the magnifier. The Aimpoint TwistMount allows this transition to occur effortlessly and in just a matter of seconds.

Mechanical Interface:

The recommended mount for the 3XMag is the Aimpoint® TwistMount, which allows for quick attachment on any MIL-Std 1913 Picatinny Rail. Check if you need a spacer for co-witnessing with the Aimpoint sight.
The 3XMag can also be attached to aftermarket “flip side” mounts.

Unique Features:

  • Mountable on a rail system behind Aimpoint sights
  • Extremely fast and ingenious mounting solution (Twist Mount - Picatinny)
  • Can also be mounted with a regular 30 mm ring
  • Provides extended range to the operator
  • Combines the best of two worlds – CQB & semi-sniping
  • Increases confidence, performance, and flexibility
  • No influence on point of impact – No need for re-zeroing the sight
  • Doubles as handheld magnifying glass monocular.

Technical Specifications:

General Specifications:
Art.No: 11324

Optical Specifications:

  • Operating principle: Magnifying device
  • Optical magnification: 3x
  • Aiming dot size: Uses the reticle of the combining sight
  • NVD compatible: Yes
  • Optical coating: Anti-reflex, all surfaces and multi-layer. NVD-Compatible 1, 2, 3
  • Clear aperture: 20 mm
  • Eye relief: 60-65 mm at full FOV (40-90 mm at 5° FOV)
  • Transmission: >60% (700–1000 nm)
  • Resolution: >12 (lp/mrad)
  • Dioptric adjustment: Fixed -1.0 D

Power Source:

Battery type: No power required

Physical Specifications:

  • Length sight only: 110 mm (4 5/16")
  • Length std conf: 110 mm (4 5/16")
  • Width: 44 mm (1 3/4")
  • Height sight only: 41 mm (1 5/8")
  • Weight sight only (incl battery): 200 g (7,1 oz) including rubber cover
  • Housing material: High Strength Aluminum
  • Housing finish and color: Matte black
  • Material mount and spacer std conf: High Strength Aluminum
  • Surface treatment: Hard anodized, matte, with protective rubber armor cover
  • Height of optical axis - sight and mount: 30 mm (1 3/16") over top surface of Picatinny/Weaver Rail
  • Height of optical axis - sight, mount and Micro spacer XX: 39 mm (1 9/16") over top surface of Picatinny/Weaver Rail

Environmental Specifications:

  • Temperature range operation: -45°C to 71°C (-49°F to 160°F)
  • Temperature range storage: -51°C to 71°C (-60°F to 160°F)
  • Temperature shock: Operable after a temperature shock between -45°C and +71°C. Duration: 4h of Hot +71°C, 4h of Cold -45°C. Cycling: 3 times
  • Humidity: Operates despite the humidity. Limits: RH: 95%, Temp: 20ºC to 50 ºC, cyclic
  • Immersion, static: Operates after immersion. Limits: Depth: 1 m (3 ft.)
  • Shock: Operable before and aftershock. Limits: X-axis: 500 g, 0.7 – 1.1 ms (3 shocks), Y-axis: 40g ±4g, 11 ±1ms (2 shocks in each direction, Z-axis: 40g ±4g, 11 ±1ms, 2 shocks in each direction. Functional during exposure (room temperature)
  • Vibration: Operates despite vibration. Limits: Vibration, sinusoidal in a frequency range of 10-150 Hz. Frequency: 10-30 Hz, ±1.587 mm, Frequency: 30-150 Hz. 5.75 g, 1 octave/min
  • Chemical resistance: Withstands occasional contamination of: Hydraulic oil (FSD 8407, Tryckolja 021), Lubricating oil (FSD 8127, Motorolja 5W/30), Lubricating oil (FSD 8220, Smörjfett 220), Lubricating oil (Break Free), Fuels (FSD 8612, Diesel fuel oil), Solvents/cleaning (FSD)

No Related Posts

Write Your Own Review
You're reviewing:3X Mag Aimpoint High Quality Magnifying Module With Spacer & Twist Mount
Your Rating